Back to all

Automotive Tips from Mr. Lube: A Broken or Damaged Timing Belt

May 1, 2022

The timing belt rotates the cam shafts which open and close the valves that allow air, fuel, and exhaust to flow through the engine as it powers your car when you drive around Bentonville.

An old timing belt can lose a “tooth” in the belt allowing it to slip. The engine could stop or misfire. Timing belt slips – or a broken timing belt – can be disastrous on some engines. In “interference” engines, open valves can get in the way of the piston when the timing belt breaks or slips. When that happens one or more valves can be bent requiring expensive engine repairs.

It is important for Bentonville drivers to replace their timing belts as recommended in their owner’s manual to avoid unnecessary breakdowns. Ask the team of professionals at Mr. Lube in Bentonville if it’s time for your timing belt to be replaced.

Mr. Lube
903 NW Second St
Bentonville, Arkansas 72712
479-271-2323
https://www.mrlubebentonville.msprotemp.com/

More articles from Mr. Lube & Wash

Sounds Exhausting! (Exhaust Service)

December 15, 2024

Most of us know a bad muffler when we hear it. That loud, rumbling sound is unmistakable. Did you also know you can get a ticket for driving around with a loud exhaust system? If your exhaust system has a leak in it, it may be allowing poisonous gases inside your vehicle and could make you serio... More

Beware of Potholes! (Avoiding Pothole Damage)

December 8, 2024

You may live in a region where roads become pockmarked with craters known better as potholes. They're caused by moisture seeping through a compromised road surface that can freeze, expand and literally punch holes in the road. And when your vehicle hits one of those holes that's big enough, the... More

U and your U-Joints (Lubricate U-Joints)

December 1, 2024

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More