Back to all

Fuel System Cleaning at Mr. Lube for Better Performance

March 6, 2022

Hi Bentonville residents. Let's talk fuel injectors. A fuel injector is a valve that delivers fuel to a vehicle's engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.

Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.

Vehicles have one fuel injector for each cylinder in the engine. Your vehicle's control computer constantly monitors the engine and various sensors in the vehicle.  It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle's engine. Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel efficiency and loss of engine performance for Bentonville residents.

So it's to Bentonville residents' advantage to keep their fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name fuel companies also deliver a more consistent quality of fuel to Bentonville vehicles than do bargain Bentonville area service stations.

The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.

Bentonville residents should check their owner's manual to find out how often they should change their fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.

You can also purchase cleaners at Mr. Lube that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won't be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use. If your fuel injectors are gummed up, you can get a professional deep cleaning service at Mr. Lube in Bentonville that will result in better fuel economy and improved vehicle performance.

Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.

Mr. Lube
903 NW Second St
Bentonville, Arkansas 72712
479-271-2323
https://www.mrlubebentonville.msprotemp.com/

More articles from Mr. Lube & Wash

Sounds Exhausting! (Exhaust Service)

December 15, 2024

Most of us know a bad muffler when we hear it. That loud, rumbling sound is unmistakable. Did you also know you can get a ticket for driving around with a loud exhaust system? If your exhaust system has a leak in it, it may be allowing poisonous gases inside your vehicle and could make you serio... More

Beware of Potholes! (Avoiding Pothole Damage)

December 8, 2024

You may live in a region where roads become pockmarked with craters known better as potholes. They're caused by moisture seeping through a compromised road surface that can freeze, expand and literally punch holes in the road. And when your vehicle hits one of those holes that's big enough, the... More

U and your U-Joints (Lubricate U-Joints)

December 1, 2024

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More