Back to all

Mr. Lube Tire Safety: Washington vs. Lincoln

September 12, 2021

 

Welcome to the Mr. Lube automotive blog. Today, let's talk about the effect of tire wear.

Let's focus on stopping in wet Bentonville conditions. In order for a tire to have good contact with the road, it has to move the water out of the way. If it can't move the water, the tire will actually ride on top of a thin film of water.

That's called hydroplaning. If it's really bad, Bentonville drivers can actually spin out of control - endangering themselves and the other drivers around them. At best, you won't stop as fast.

So how does a tire move water? It has channels for water to flow through. Look at your vehicle tire and you'll see channels: channels that run around the tire and channels that flow across the tire. They're designed to direct water away from the tire so it can contact the road better.

And the deeper the channel, the more water it can move. A brand new Mr. Lube tire has very deep channels and can easily move a lot of water. As the tire wears down, the channels become shallower and can move less water. When it wears down enough, it can seriously affect your ability to stop your vehicle on wet Bentonville roads.

So that's why it's so important for Bentonville drivers to replace their vehicle tires when they get worn. Consumer Reports and other advocate groups call for a standard of 3/32 of an inch and they have the studies to prove it.

At Mr. Lube, we want our customers to know that the deeper recommended tread depth makes a big difference. Stopping distances are cut dramatically on wet Bentonville streets. A safe stop from Arkansas speeds with 4/32 of an inch of tread would result in a crash with worn out tires.

There's an easy way to tell when a tire's worn to 4/32 of an inch.

Just insert a quarter into the tread. Put it in upside down. If the tread doesn't cover George Washington's hairline, it's time to replace your vehicle tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

Many Bentonville residents have heard of this technique using a penny and Abe Lincoln's head - the old method. That measure gives you 2/32 of an inch – half the suggested amount. Of course, vehicle tires are a major purchase. Most of us in Bentonville want to get as many miles out of them as we can. But there's a real safety trade-off. It's your choice.

Mr. Lube
903 NW Second St
Bentonville, Arkansas 72712
479-271-2323
https://www.mrlubebentonville.msprotemp.com/

More articles from Mr. Lube & Wash

Sounds Exhausting! (Exhaust Service)

December 15, 2024

Most of us know a bad muffler when we hear it. That loud, rumbling sound is unmistakable. Did you also know you can get a ticket for driving around with a loud exhaust system? If your exhaust system has a leak in it, it may be allowing poisonous gases inside your vehicle and could make you serio... More

Beware of Potholes! (Avoiding Pothole Damage)

December 8, 2024

You may live in a region where roads become pockmarked with craters known better as potholes. They're caused by moisture seeping through a compromised road surface that can freeze, expand and literally punch holes in the road. And when your vehicle hits one of those holes that's big enough, the... More

U and your U-Joints (Lubricate U-Joints)

December 1, 2024

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More